Key information
- Pressure cleaning in Perth typically costs $3–$7 per m² – around $3–$5.50/m² for concrete driveways and paths, and $4.50–$7/m² for pavers and limestone. Whole-job cleans generally run $150–$300+ for a patio and $150–$350+ for a driveway.
- Operators price pressure cleaning jobs differently: by square metre, by the hour, or as a flat rate. Check the terms for surcharges on larger areas or heavy staining before assuming any flat rate applies to your job.
- A proper quote is based on an in-person assessment of your surface, size and staining, not a generic price list. This gives you a firm, accurate figure rather than a ballpark estimate.
- DIY pressure washing often results in an uneven clean and problem runoff, and the cost of equipment, chemicals and time can outweigh the saving compared to hiring a professional.
- Sealing after cleaning is optional but protects porous stone and concrete from UV, staining and Perth’s weather extremes, extending the time between cleans.
How much is pressure cleaning in Perth, WA?
A quick look at market offerings shows pressure cleaning in Perth can range anywhere from $3 per metre to $7 per metre, but there are a few different ways that Perth-based operators will price their jobs. Some will base it on the area (giving you a cost per square metre), while others will charge an hourly rate. Many will have a minimum callout fee.
Other places may give a flat rate – “This is what a pressure cleaning job costs with us!” – but you should always read the terms and conditions to see if there are any surcharges for bigger areas or stain removal. Often this is actually the price for what they would consider a “standard” job, so if you have a larger area or need more intensive cleaning for built up grime, you’ll end up with a bigger bill than advertised.
Market estimates for pressure cleaning prices in Perth
Here are some indicative numbers showing how much Perth pressure cleaning may cost you.
| Surface / Job Type | Indicative Cost |
|---|---|
| Concrete driveways/paths | $3–$5.50 per m² |
| Pavers/limestone | $4.50–$7 per m² |
| Patio (whole job) | $150–$300+ |
| Driveway (whole job) | $150–$350+ |
Note: Prices are indicative only, and will vary between operators. Contact Mr Blastit for an accurate quote.
What affects the cost of professional pressure washing?
In simple terms – the size and the labour and/or materials are the biggest factors in pressure cleaning pricing. Things that might increase pressure washing costs:
- a larger area
- a more complex job in terms of heavy stains, organic growth or grime
- if the surface otherwise requires special care outside of a ‘standard’ job
No one wants to pay more than they have to, or feel like they got ripped off – but when it comes to pressure cleaning, you often get what you pay for. While you should definitely look for good value, you should also consider that the cheapest offering might not get you the result you’re after.
Why a pressure cleaning quote beats a price list
Price lists can seem reassuring, but they’re mostly helpful for ballpark estimates of what you can expect to pay for professional pressure washing services. Online fixed price lists or calculators are based on averages, and final prices can differ once accounting for everything needed in your specific situation.
A proper quote is based on an assessment of the actual job: what’s needed to shift the grime, oil, mould or staining on that surface, rather than a flat rate that risks under-quoting a heavily soiled job or over-charging a straightforward one.
That’s why we choose to tailor our quotes based on what your pressure washing job requires. We can give you an instant price estimate based on a few simple questions:
- What is the service required? Are you after pressure cleaning as a standalone service, or do you need new sealer applied as well?
- What is the size of the outdoor area? In square metres.
- Is stain removal needed? Do your exterior surfaces have marks like oil, mould, spills, hot tyre marks, rust stains?
But we will also visit your property prior to undertaking any work and assess the job in person, to give you an accurate, firm quote based on the actual scope.
Can you DIY pressure cleaning instead?
If you’re looking at all this info about pricing and quotes and thinking it’s headed for the too-hard basket, don’t worry. It’s actually a simple process, especially compared to doing it yourself.
Why avoid DIY pressure cleaning?
When you clean a property with a DIY-level pressure washer unit, you’ll typically be using a cold water system and chemicals to get the best possible clean with the tools available. It can seem like a straightforward job at first, but you can easily end up with an uneven cleaning when using these pressure washing units. The water pressure is not as consistent, and operation largely depends on you being able to steadily work across the surface. For larger areas like concrete driveways, this gets tedious fast.
Then there’s the runoff to contend with; clogging your gutters, getting in the pool, even flicking up on the side of the house. It can quickly turn into a bigger job than you’d like once you factor in prep, buying supplies like chemical treatments or the washing equipment itself, and cleanup. If you’re looking to save money by not hiring a professional cleaner, ask yourself how much you’re really saving when you factor everything in – and whether it’s worth the cost to your time.
Note: If you DIY, be sure to use appropriate protective gear and take all recommended safety measures. If you’re using chemical treatments, always follow the manufacturer’s directions.
Related: How to clean pavers before sealing them
Professional pressure cleaning with Mr Blastit
Booking a professional service might mean reaching out for a quote, but other than that, it’s almost entirely hands-off for you. For example, here’s how a job runs with Mr Blastit:
- You contact us for a free price estimate.
- We assess the area and provide a firm quote for your high pressure cleaning cost.
- We come and clean your outdoor space (same day service available) with our hot water high pressure vacuum recovery system and eco-friendly cleaning solutions – a no mess, family-home friendly option that gives a deep, even clean without leaving dirty water everywhere.
- If needed, we apply a water-based penetrating sealer to help keep your surfaces protected against UV, spills, and other contaminants over time.
- You get to enjoy your home in its full glory, without having to do the dirty work yourself.
When you work with Mr Blastit, you benefit from our specialised equipment, experience with different surfaces, and efficient cleaning methods.
Will skipping sealer make pressure cleaning cheaper?
At the time of purchase, sure. But skipping sealer after a high pressure cleaning service can cost you more in the long term.
Stone – both natural and manmade – is porous. Without a quality, water-permeable sealer to protect it, the surface can degrade quicker than you’d like. In Perth, harmful elements like UV and our extreme weather (heating and cooling cycles, torrential winter rain) can speed this up even further. The right sealer will:
- Enhance the look of the stone
- Protect against contaminants like dirt, mould, algae, mildew
- For driveways – help prevent oil stains, hot tyre marks
- Protect against UV fading and other weathering damage
- Make it easier to maintain with general cleaning between pressure cleaning jobs
- Prolong the lifespan of natural stone, manmade stone and concrete – helping you maintain your home’s curb appeal over time
You may not need sealing every time you have a pressure clean, as a high-quality sealer can last for many years. But if your stone or concrete does need sealing, you’re doing yourself a disservice by putting it off.
Related: Is Paver Sealer Necessary?
Same-day pressure cleaning and sealing in Perth, WA
Mr Blastit is a family-owned, fully insured business providing professional pressure cleaning services across Perth Metro. areas, Pinjarra and Mandurah. We take the utmost care with residential jobs and leave you with clean, beautiful outdoor spaces you’ll be proud to show off.
If you want to get pressure cleaning done, and get it done right – why not contact Mr Blastit today for a free quote.
